번역브랜드 : DIY
유래 : 중국 컨티넨탈
배터리 방식 : 직류
색상 분류 : 모터 + 거치대 + 속도 조절기 + 홀더 클램프 , 모터 + 거치대 + 속도 조절기 , 모터 + 거치대 , 모터
전기드릴 유형 : 기타 /other
속도 조절 : 인피니트 변속
홀더 클램프 유형 : 범용 홀더 클램프
최대 집게 능력 : 10mm
제품 번호. : 51S
조작 방식 : 데스크탑
원문品牌: DIY
产地: 中国大陆
电源方式: 直流电
颜色分类: 电机+支架+调速器+夹头,电机+支架+调速器,电机+支架,电机
电钻类型: 其他/other
调速: 无极变速
夹头类型: 通用夹头
最大夹持能力: 10mm
货号: 51S
操作方式: 台式
品牌: DIY
产地: 中国大陆
电源方式: 直流电
颜色分类: 电机+支架+调速器+夹头,电机+支架+调速器,电机+支架,电机
电钻类型: 其他/other
调速: 无极变速
夹头类型: 通用夹头
最大夹持能力: 10mm
货号: 51S
操作方式: 台式
1. Xinjiang, Tibet, Inner Mongolia, Gansu, Ningxia, Qinghai because of high freight, and not free shipping. You need to make up your postage to ship. Hong Kong, Macao and Taiwan, and overseas, can only find logistics transfer that can be transferred to motor, you can''''t ship directly, thank you!
2. The motor needs to connect the premium bridge to use 220V to AC power. Remember to use 220V to AC power directly! If you buy a suit with a adjustable speed, you can connect the motor to the speed regulator. You do not need to connect the flow bridge; the motor is a carbon brush motor, the speed is about 6500 rpm, and the error is 5-8 %. Essence It can be reversed, the speed is regulated, and the strength will decrease after lowering.(You need to buy a positive reverse switch and speed regulator yourself.)
3. Set with diamond sandwiches: Because the B12 chip is a sandwich of Zhejiang San Euro, there is an error of about 25 wires from the factory, so please contact the owner with high accuracy and deduct the money of the sandwich. High accuracy is a bit more pinch.
4. Set with tunes: The speed can be between 650-6500 rpm. The lower the speed, the smaller the strength.
220V DC motor, there is no pick -up shop(Other stores are unclear)In the case of the speed regulator, you must first connect the flow bridge and then use 220V to AC power. Do not directly connect 220V AC power and burn it.
Different suits in this connection have not been decelerated by the synchronous wheel, so it cannot be compared with the drill with a large drill with a deceleration gear on the market, let alone cut and wide wooden boards. Because the full -closed fast motor is relatively fast, the general use time is controlled within one hour.
The problems occur when using the speed regulator:
1. The power and power of the motor will decrease with the speed of speed;
2. Some motor opportunities are shake. It is recommended to add a filter capacitor, which will be better. But it will not be completely eliminated;
3. If you want to reduce the speed and do not want to reduce your strength, you can use synchronous wheels to solve the synchronization; but this output has only one fixed speed;
4. After picking up, be sure to seal it with an insulating tape and power. Prevent a short circuit to burn the motor or other accessories.